L0 = <http://www.simantics.org/Layer0-1.1>
P3D = <http://www.simantics.org/Plant3D-0.1>


P3D.Builtin : P3D.ComponentLibrary

P3D.Builtin.NozzleGeometryProvider : P3D.GeometryProvider
P3D.Builtin.FlatNozzleGeometryProvider : P3D.GeometryProvider
P3D.Builtin.HorizontalTankGeometryProvider : P3D.GeometryProvider
P3D.Builtin.VerticalTankGeometryProvider : P3D.GeometryProvider
P3D.Builtin.StraightGeometryProvider : P3D.GeometryProvider
P3D.Builtin.ElbowGeometryProvider : P3D.GeometryProvider
P3D.Builtin.ReducerGeometryProvider : P3D.GeometryProvider
P3D.Builtin.PumpGeometryProvider : P3D.GeometryProvider
P3D.Builtin.BallValveGeometryProvider : P3D.GeometryProvider
P3D.Builtin.CheckValveGeometryProvider : P3D.GeometryProvider
P3D.Builtin.GateValveGeometryProvider : P3D.GeometryProvider
P3D.Builtin.CapGeometryProvider : P3D.GeometryProvider

 
P3D.Builtin.ConcentricReducer <T P3D.InlineComponent : P3D.InlineComponent
    L0.HasLabel "Concentric reducer"
    @L0.assert P3D.hasGeometry P3D.Builtin.ReducerGeometryProvider
    @L0.tag P3D.SizeChangeComponent
    @L0.tag P3D.FixedLengthInlineComponent
    @L0.tag P3D.DualConnectedComponent

P3D.Builtin.EccentricReducer <T P3D.InlineComponent : P3D.InlineComponent 
    L0.HasLabel "Eccentric reducer"
    @L0.assert P3D.hasGeometry P3D.Builtin.ReducerGeometryProvider
    @L0.tag P3D.OffsetComponent
    @L0.tag P3D.SizeChangeComponent
    @L0.tag P3D.FixedLengthInlineComponent
    @L0.tag P3D.DualConnectedComponent
    @L0.tag P3D.RotateComponent

P3D.Builtin.Elbow <T P3D.TurnComponent : P3D.TurnComponent  
    L0.HasLabel "Elbow"
    @L0.tag P3D.VariableAngleTurnComponent
    @L0.tag P3D.DualConnectedComponent
    @L0.assert P3D.hasGeometry P3D.Builtin.ElbowGeometryProvider

P3D.Builtin.Straight <T P3D.InlineComponent : P3D.InlineComponent
    L0.HasLabel "Straight pipe"
    @L0.tag P3D.DualConnectedComponent
    @L0.tag P3D.VariableLengthInlineComponent
    @L0.assert P3D.hasGeometry P3D.Builtin.StraightGeometryProvider

P3D.Builtin.BranchSplitComponent <T P3D.InlineComponent : P3D.InlineComponent
    L0.HasLabel "Branch split component"
    @L0.tag P3D.CodeComponent
    @L0.tag P3D.FixedLengthInlineComponent
    @L0.tag P3D.NonVisibleComponent
    
    
P3D.Builtin.Nozzle <T P3D.Nozzle : P3D.Nozzle
      L0.HasLabel "Nozzle"
      @L0.assert P3D.hasGeometry P3D.Builtin.NozzleGeometryProvider
      @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "length" : L0.String
           P3D.hasParameterValue 0.1 : L0.Double
P3D.Builtin.FlatNozzle <T P3D.Nozzle : P3D.Nozzle
      L0.HasLabel "Flat nozzle"
      @L0.assert P3D.hasGeometry P3D.Builtin.FlatNozzleGeometryProvider
      
P3D.Builtin.HorizontalTank <T P3D.Equipment : P3D.Equipment
     L0.HasLabel "Horizontal tank"
     @L0.assert P3D.hasGeometry P3D.Builtin.HorizontalTankGeometryProvider
     @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "radius" : L0.String
           P3D.hasParameterValue 0.2 : L0.Double
     @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "length" : L0.String
           P3D.hasParameterValue 1.0 : L0.Double
P3D.Builtin.VerticalTank <T P3D.Equipment : P3D.Equipment
     L0.HasLabel "Vertical tank"
     @L0.assert P3D.hasGeometry P3D.Builtin.VerticalTankGeometryProvider
     @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "radius" : L0.String
           P3D.hasParameterValue 0.2 : L0.Double
     @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "height" : L0.String
           P3D.hasParameterValue 1.0 : L0.Double
P3D.Builtin.Pump <T P3D.Equipment : P3D.Equipment
     L0.HasLabel "Pump"
     @L0.assert P3D.hasGeometry P3D.Builtin.PumpGeometryProvider
     @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "width" : L0.String
           P3D.hasParameterValue 0.25 : L0.Double
     @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "length" : L0.String
           P3D.hasParameterValue 0.5 : L0.Double
     @L0.assert P3D.HasFixedNozzles 2
                
P3D.Builtin.BallValve <T P3D.InlineComponent : P3D.InlineComponent
    L0.HasLabel "Ball valve"
    @L0.tag P3D.DualConnectedComponent
    @L0.tag P3D.FixedLengthInlineComponent
    @L0.assert P3D.hasGeometry P3D.Builtin.BallValveGeometryProvider
    @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "radius" : L0.String
           P3D.hasParameterValue 0.1 : L0.Double
           
P3D.Builtin.CheckValve <T P3D.InlineComponent : P3D.InlineComponent
    L0.HasLabel "Check valve"
    @L0.tag P3D.DualConnectedComponent
    @L0.tag P3D.FixedLengthInlineComponent
    @L0.tag P3D.ReverseComponent
    @L0.assert P3D.hasGeometry P3D.Builtin.CheckValveGeometryProvider
    @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "radius" : L0.String
           P3D.hasParameterValue 0.1 : L0.Double
           
P3D.Builtin.GateValve <T P3D.InlineComponent : P3D.InlineComponent
    L0.HasLabel "Gate valve"
    @L0.tag P3D.DualConnectedComponent
    @L0.tag P3D.FixedLengthInlineComponent
    @L0.tag P3D.RotateComponent
    @L0.assert P3D.hasGeometry P3D.Builtin.GateValveGeometryProvider
    @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "radius" : L0.String
           P3D.hasParameterValue 0.1 : L0.Double
           
P3D.Builtin.Cap <T P3D.EndComponent : P3D.EndComponent
    L0.HasLabel "Cap"
    @L0.assert P3D.hasGeometry P3D.Builtin.CapGeometryProvider
    @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "radius" : L0.String
           P3D.hasParameterValue 0.1 : L0.Double
     
P3D.Builtin.Elbow90 <T P3D.TurnComponent : P3D.TurnComponent
    L0.HasLabel "90 degree elbow"
    @L0.tag P3D.FixedAngleTurnComponent
    @L0.tag P3D.DualConnectedComponent
    @L0.assert P3D.hasGeometry P3D.Builtin.ElbowGeometryProvider
    @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "turnAngle" : L0.String
           //P3D.hasParameterValue 90.0 : L0.Double
           P3D.hasParameterValue 1.5707963267948966192313216916398 : L0.Double
    @L0.assert P3D.HasTurnAngle
         1.5707963267948966192313216916398 : L0.Double
         
P3D.Builtin.Elbow45 <T P3D.TurnComponent : P3D.TurnComponent  
    L0.HasLabel "45 degree elbow"
    @L0.tag P3D.FixedAngleTurnComponent
    @L0.tag P3D.DualConnectedComponent
    @L0.assert P3D.hasGeometry P3D.Builtin.ElbowGeometryProvider
    @L0.assert P3D.hasParameter
         _ :P3D.Parameter
           L0.HasName "turnAngle" : L0.String
           //P3D.hasParameterValue 45.0 : L0.Double
           P3D.hasParameterValue 0.78539816339744830961566084581988 : L0.Double
    @L0.assert P3D.HasTurnAngle
         0.78539816339744830961566084581988 : L0.Double