Added labels to piping component types

[simantics/3d.git] / org.simantics.plant3d.ontology / graph / plant3d_builtins.pgraph

diff --git a/org.simantics.plant3d.ontology/graph/plant3d_builtins.pgraph b/org.simantics.plant3d.ontology/graph/plant3d_builtins.pgraph
index a26abde450c5e2e0309051da91d0c6470f5bafef..ff4f149bb086ad30943f428fe86a308fcd0592c0 100644 (file)
--- a/org.simantics.plant3d.ontology/graph/plant3d_builtins.pgraph
+++ b/org.simantics.plant3d.ontology/graph/plant3d_builtins.pgraph
@@ -2,9 +2,10 @@ L0 = <http://www.simantics.org/Layer0-1.1>
 P3D = <http://www.simantics.org/Plant3D-0.1>
 
 
-P3D.Builtin : L0.Library
+P3D.Builtin : P3D.ComponentLibrary
 
 P3D.Builtin.NozzleGeometryProvider : P3D.GeometryProvider
+P3D.Builtin.FlatNozzleGeometryProvider : P3D.GeometryProvider
 P3D.Builtin.HorizontalTankGeometryProvider : P3D.GeometryProvider
 P3D.Builtin.VerticalTankGeometryProvider : P3D.GeometryProvider
 P3D.Builtin.StraightGeometryProvider : P3D.GeometryProvider
@@ -18,57 +19,53 @@ P3D.Builtin.CapGeometryProvider : P3D.GeometryProvider
 
  
 P3D.Builtin.ConcentricReducer <T P3D.InlineComponent : P3D.InlineComponent
+    L0.HasLabel "Concentric reducer"
     @L0.assert P3D.hasGeometry P3D.Builtin.ReducerGeometryProvider
     @L0.tag P3D.SizeChangeComponent
     @L0.tag P3D.FixedLengthInlineComponent
     @L0.tag P3D.DualConnectedComponent
-//  HasRotationAngle "0.0" : Double
-//  HasControlPoint 
-//    _ : SizeChangeControlPoint
+
 P3D.Builtin.EccentricReducer <T P3D.InlineComponent : P3D.InlineComponent 
+    L0.HasLabel "Eccentric reducer"
     @L0.assert P3D.hasGeometry P3D.Builtin.ReducerGeometryProvider
     @L0.tag P3D.OffsetComponent
     @L0.tag P3D.SizeChangeComponent
     @L0.tag P3D.FixedLengthInlineComponent
     @L0.tag P3D.DualConnectedComponent
     @L0.tag P3D.RotateComponent
-//  HasRotationAngle "0.0" : Double
-//  HasControlPoint 
-//    _ : SizeChangeControlPoint : OffsettingPoint
+
 P3D.Builtin.Elbow <T P3D.TurnComponent : P3D.TurnComponent  
+    L0.HasLabel "Elbow"
     @L0.tag P3D.VariableAngleTurnComponent
     @L0.tag P3D.DualConnectedComponent
     @L0.assert P3D.hasGeometry P3D.Builtin.ElbowGeometryProvider
-//  HasLength "0.0" : Double
-//  HasTurnRadius "0.0" : Double
-//  HasTurnAngle "0.0" : Double
-//  HasControlPoint 
-//    _ : VariableAngleTurnControlPoint
+
 P3D.Builtin.Straight <T P3D.InlineComponent : P3D.InlineComponent
+    L0.HasLabel "Straight pipe"
     @L0.tag P3D.DualConnectedComponent
     @L0.tag P3D.VariableLengthInlineComponent
     @L0.assert P3D.hasGeometry P3D.Builtin.StraightGeometryProvider
-//  HasLength "0.0" : Double
-//  HasControlPoint 
-//    _ : VariableLengthControlPoint
+
 P3D.Builtin.BranchSplitComponent <T P3D.InlineComponent : P3D.InlineComponent
+    L0.HasLabel "Branch split component"
     @L0.tag P3D.CodeComponent
     @L0.tag P3D.FixedLengthInlineComponent
     @L0.tag P3D.NonVisibleComponent
-//  HasLength "0.0" : Double          
-//  HasControlPoint
-//    _ : BranchControlPoint
-//P3D.Builtin.Vessel : P3D.Equipment
-//    @L0.tag L0.Abstract
-//P3D.Builtin.VerticalVessel <T P3D.Builtin.Vessel
-    //[HasHeight card "1"]
-//P3D.Builtin.HorizontalVessel <T P3D.Builtin.Vessel
-    //[HasLength card "1"]
     
     
 P3D.Builtin.Nozzle <T P3D.Nozzle : P3D.Nozzle
+      L0.HasLabel "Nozzle"
       @L0.assert P3D.hasGeometry P3D.Builtin.NozzleGeometryProvider
+      @L0.assert P3D.hasParameter
+         _ :P3D.Parameter
+           L0.HasName "length" : L0.String
+           P3D.hasParameterValue 0.1 : L0.Double
+P3D.Builtin.FlatNozzle <T P3D.Nozzle : P3D.Nozzle
+      L0.HasLabel "Flat nozzle"
+      @L0.assert P3D.hasGeometry P3D.Builtin.FlatNozzleGeometryProvider
+      
 P3D.Builtin.HorizontalTank <T P3D.Equipment : P3D.Equipment
+     L0.HasLabel "Horizontal tank"
      @L0.assert P3D.hasGeometry P3D.Builtin.HorizontalTankGeometryProvider
      @L0.assert P3D.hasParameter
          _ :P3D.Parameter
@@ -79,6 +76,7 @@ P3D.Builtin.HorizontalTank <T P3D.Equipment : P3D.Equipment
            L0.HasName "length" : L0.String
            P3D.hasParameterValue 1.0 : L0.Double
 P3D.Builtin.VerticalTank <T P3D.Equipment : P3D.Equipment
+     L0.HasLabel "Vertical tank"
      @L0.assert P3D.hasGeometry P3D.Builtin.VerticalTankGeometryProvider
      @L0.assert P3D.hasParameter
          _ :P3D.Parameter
@@ -89,6 +87,7 @@ P3D.Builtin.VerticalTank <T P3D.Equipment : P3D.Equipment
            L0.HasName "height" : L0.String
            P3D.hasParameterValue 1.0 : L0.Double
 P3D.Builtin.Pump <T P3D.Equipment : P3D.Equipment
+     L0.HasLabel "Pump"
      @L0.assert P3D.hasGeometry P3D.Builtin.PumpGeometryProvider
      @L0.assert P3D.hasParameter
          _ :P3D.Parameter
@@ -101,6 +100,7 @@ P3D.Builtin.Pump <T P3D.Equipment : P3D.Equipment
      @L0.assert P3D.HasFixedNozzles 2
                 
 P3D.Builtin.BallValve <T P3D.InlineComponent : P3D.InlineComponent
+    L0.HasLabel "Ball valve"
     @L0.tag P3D.DualConnectedComponent
     @L0.tag P3D.FixedLengthInlineComponent
     @L0.assert P3D.hasGeometry P3D.Builtin.BallValveGeometryProvider
@@ -110,6 +110,7 @@ P3D.Builtin.BallValve <T P3D.InlineComponent : P3D.InlineComponent
            P3D.hasParameterValue 0.1 : L0.Double
            
 P3D.Builtin.CheckValve <T P3D.InlineComponent : P3D.InlineComponent
+    L0.HasLabel "Check valve"
     @L0.tag P3D.DualConnectedComponent
     @L0.tag P3D.FixedLengthInlineComponent
     @L0.tag P3D.ReverseComponent
@@ -120,6 +121,7 @@ P3D.Builtin.CheckValve <T P3D.InlineComponent : P3D.InlineComponent
            P3D.hasParameterValue 0.1 : L0.Double
            
 P3D.Builtin.GateValve <T P3D.InlineComponent : P3D.InlineComponent
+    L0.HasLabel "Gate valve"
     @L0.tag P3D.DualConnectedComponent
     @L0.tag P3D.FixedLengthInlineComponent
     @L0.tag P3D.RotateComponent
@@ -130,30 +132,35 @@ P3D.Builtin.GateValve <T P3D.InlineComponent : P3D.InlineComponent
            P3D.hasParameterValue 0.1 : L0.Double
            
 P3D.Builtin.Cap <T P3D.EndComponent : P3D.EndComponent
+    L0.HasLabel "Cap"
     @L0.assert P3D.hasGeometry P3D.Builtin.CapGeometryProvider
     @L0.assert P3D.hasParameter
          _ :P3D.Parameter
            L0.HasName "radius" : L0.String
            P3D.hasParameterValue 0.1 : L0.Double
      
-P3D.Builtin.Elbow90 <T P3D.TurnComponent : P3D.TurnComponent  
+P3D.Builtin.Elbow90 <T P3D.TurnComponent : P3D.TurnComponent
+    L0.HasLabel "90 degree elbow"
     @L0.tag P3D.FixedAngleTurnComponent
     @L0.tag P3D.DualConnectedComponent
     @L0.assert P3D.hasGeometry P3D.Builtin.ElbowGeometryProvider
     @L0.assert P3D.hasParameter
          _ :P3D.Parameter
            L0.HasName "turnAngle" : L0.String
-           P3D.hasParameterValue 90.0 : L0.Double
+           //P3D.hasParameterValue 90.0 : L0.Double
+           P3D.hasParameterValue 1.5707963267948966192313216916398 : L0.Double
     @L0.assert P3D.HasTurnAngle
          1.5707963267948966192313216916398 : L0.Double
          
 P3D.Builtin.Elbow45 <T P3D.TurnComponent : P3D.TurnComponent  
+    L0.HasLabel "45 degree elbow"
     @L0.tag P3D.FixedAngleTurnComponent
     @L0.tag P3D.DualConnectedComponent
     @L0.assert P3D.hasGeometry P3D.Builtin.ElbowGeometryProvider
     @L0.assert P3D.hasParameter
          _ :P3D.Parameter
            L0.HasName "turnAngle" : L0.String
-           P3D.hasParameterValue 45.0 : L0.Double
+           //P3D.hasParameterValue 45.0 : L0.Double
+           P3D.hasParameterValue 0.78539816339744830961566084581988 : L0.Double
     @L0.assert P3D.HasTurnAngle
          0.78539816339744830961566084581988 : L0.Double
\ No newline at end of file