]> gerrit.simantics Code Review - simantics/3d.git/history - org.simantics.plant3d/src/org
No insertion of straight pipe in straight pipe
[simantics/3d.git] / org.simantics.plant3d / src / org /
2020-05-08 Reino RuusuNo insertion of straight pipe in straight pipe 39/4239/1
2020-05-08 Reino RuusuIndicate ongoing translation operations in UI 38/4238/1
2020-05-08 Reino RuusuChange rotation angle 0 to flat-side-down in eccentric... 37/4237/1
2020-04-28 Reino RuusuFix enabled state of wall thickness 31/4131/1
2020-04-21 Reino RuusuAvoid extra write transactions when opening Plant3D... 76/4176/1
2020-04-20 Reino RuusuTake values from pipe run as defaults for reducers 66/4166/1
2020-04-20 Reino RuusuOnly show elbows and ends when adding to an open pipe... 65/4165/1
2020-04-15 Reino RuusuReplace "turn" with "elbow" in component creation UI 43/4143/1
2020-04-08 Tuukka LehtonenMinor improvement for Plant3DEditor extensibility 09/4109/1
2020-04-07 Reino RuusuHide insertion position controls when adding to a conne... 08/4108/1
2020-04-07 Reino RuusuFix division by zero in ComponentUtls.addComponent() 07/4107/1
2020-04-07 Reino RuusuFix getControlPointEnds() for end components 05/4105/1
2020-04-06 Tuukka LehtonenMerge "Fix error in inserting dual inline components"
2020-04-06 Reino RuusuFix error in inserting dual inline components 01/4101/1
2020-04-06 Reino RuusuAdd check for presence of pipe runs when updating offset 67/4067/1
2020-04-02 Reino RuusuUpdate offset values to reflect changes in pipe run... 63/4063/1
2020-04-01 Reino RuusuDisable insertion position buttons when inserting to... 62/4062/1
2020-03-13 Tuukka LehtonenMerge branch 'release/1.43.0'
2020-03-13 Reino RuusuFix issues in offset calculations in directed path... 94/3994/1
2020-03-13 Reino RuusuFix direction calculations in addComponent() 93/3993/1
2020-03-12 Tuukka LehtonenMerge branch 'release/1.43.0'
2020-03-12 Reino RuusuFix interpretation of turn angle in InsertInstruction 92/3992/1
2020-03-12 Reino RuusuFix error in assigment of component name for new components 91/3991/1
2020-03-12 Reino RuusuFix bug in adding a component before a nozzle 90/3990/1
2020-03-12 Reino RuusuIntroduce orientToDirection() method to pipe control... 89/3989/1
2020-03-12 Reino RuusuRefactoring of PipeControlPoint.getPathLegDirection() 88/3988/1
2020-03-12 Reino RuusuFix error in checking of changes in rotation angle 87/3987/1
2020-03-12 Reino RuusuFix validation message for turn angle values in compone... 86/3986/1
2020-03-10 Reino RuusuAllow insertion of components at the ends of straight... 24/3924/2
2020-03-10 Reino RuusuAllow insertion of components at the ends of straight... 84/3984/1
2020-03-09 Reino RuusuAdd checks for invalid numerical values in ComponentSel... 78/3978/1
2020-03-09 Reino RuusuUse inside diameter for eccentric reducer offset calcul... 77/3977/1
2020-03-09 Reino RuusuAdd a wall thickness property to pipe runs. 76/3976/1
2020-03-06 Tuukka LehtonenMerge "Move global UI bindings to the product plugin"
2020-03-05 Tuukka LehtonenClose Plant3DEditor automatically when its input disapp... 71/3971/1
2020-03-05 Reino RuusuTools for fitting contents to view in Plant3D editor 69/3969/1
2020-03-02 Reino RuusuShow an error dialog when attempting to insert a too... 60/3960/1
2020-03-02 Reino RuusuUpdates elbows when turn radius is changed in pipe run 59/3959/1
2020-02-28 Reino RuusuFix list indexing error in updateFixedLengths. 41/3941/1
2020-02-26 Reino RuusuRemove edge visualization from solid objects when not... 35/3935/1
2020-02-26 Reino RuusuRestore SCL-compatible API to P3DUtil 34/3934/2
2020-02-26 Reino RuusuBlock parallel execution of position updates and valida... 10/3910/2
2020-02-26 Reino RuusuFix issue with multiple degenerate legs in front of... 09/3909/2
2020-02-26 Reino RuusuRemove listener calls when property values not updated. 08/3908/2
2020-02-24 Reino RuusuEnable model loading using an existing transaction. 03/3903/1
2020-02-20 Reino RuusuRotation angle fully in context of the path leg delta 95/3895/1
2020-02-20 Reino RuusuFix cause of endless loop in overlap resolution 94/3894/1
2020-02-20 Reino RuusuFix error in PipingRules.updateFixedLengths 93/3893/1
2020-02-20 Reino RuusuLet root node determine up direction for rotation angle... 91/3891/1
2020-02-20 Reino RuusuFix interpretation of rotation angle to path leg end... 89/3889/1
2020-02-19 Reino RuusuAllow selection of vertical direction in Plant3DEditor 83/3883/1
2020-02-14 Reino RuusuAllow unsplitting removal of reducers by joining pipe... 72/3872/1
2020-02-14 Reino RuusuFix update of inline components with offsets 71/3871/1
2020-02-14 Reino RuusuFix handling of offsets in directed path leg updates 70/3870/1
2020-02-13 Reino RuusuFix handling offset in dual directed path leg updates 68/3868/1
2020-02-12 Reino RuusuAdded a length scaling factor for adding components 67/3867/1
2020-02-11 Reino RuusuFix orientation of new straight components in insertStr... 62/3862/1
2020-02-11 Reino RuusuFix synchronization of PipingRules.currentUpdates. 60/3860/1
2020-02-06 Tuukka LehtonenMake component addition dialog resizable and remember... 54/3854/2
2020-02-06 Tuukka LehtonenMerge "Allow user to specify component name in Componen...
2020-02-06 Reino RuusuAllow user to specify component name in ComponentSelect... 55/3855/1
2020-02-06 Tuukka LehtonenFixed loading order problem that caused parameters... 53/3853/1
2020-01-29 Reino RuusuAdded labels to piping component types 19/3819/1
2019-12-12 Reino RuusuFix getRealPosition() for control points 09/3709/1
2019-12-10 Reino RuusuExpose offset calculation as API in PipingRules. 94/3694/1
2019-12-10 Reino RuusuFix issue in directed path updates with offsets 93/3693/3
2019-12-10 Reino RuusuGet inline component direction irrespectively of connec... 92/3692/2
2019-12-10 Reino RuusuAllow insertion of reducers in the middle of pipe runs 91/3691/1
2019-12-05 Marko LuukkainenForce zero offset for concentric reducers 87/3687/1
2019-12-05 Marko LuukkainenMerge "Allow property editing with just a single mouse... release/1.41.0
2019-12-05 Marko LuukkainenMerge "Fix issue with cell editor type mismatch and...
2019-12-05 Marko LuukkainenMerge "Refuse attempts to set turn radius index to...
2019-12-05 Marko LuukkainenFix directed path leg update failing to update inline... 80/3680/1
2019-12-05 Reino RuusuRefuse attempts to set turn radius index to a negative... 76/3676/1
2019-12-05 Marko LuukkainenMerge "Fix removed nodes leaving visible graphical...
2019-12-05 Marko LuukkainenYesterdays change introduced infinite loop for directed... 74/3674/1
2019-12-04 Marko LuukkainenDirected path leg update handled offset wrong way. 70/3670/1
2019-12-04 Marko LuukkainenPrevent elbows overlapping nozzles 67/3667/1
2019-12-03 Marko LuukkainenFix path leg updates when reducer is the first or the... 65/3665/1
2019-12-03 Marko LuukkainenDisable DB level undo, when model modifying actions... 63/3663/1
2019-12-03 Marko LuukkainenRevised update logic for inline components 61/3661/1
2019-12-02 Marko LuukkainenShowing error messages when components overlap each... 59/3659/1
2019-11-29 Marko LuukkainenProcessing DB changes could leave control points unsync... 46/3646/1
2019-11-29 Marko LuukkainenHandle PipeRun removals with detaching Components. 44/3644/1
2019-11-28 Marko LuukkainenRemove/Split could go over PipeRun boundary and break... 40/3640/1
2019-11-28 Marko LuukkainenAllow adding adjustable length components in the middle... 39/3639/1
2019-11-22 Reino RuusuAllow property tab contribution from all INodes. 01/3601/1
2019-11-18 Marko LuukkainenMerge "Ask component rotation angle when adding components"
2019-11-18 Marko LuukkainenAsk component rotation angle when adding components 59/3559/1
2019-11-18 Marko LuukkainenAdding specified equipment with nozzles did not work 58/3558/1
2019-11-18 Marko LuukkainenMissing library URI from Equipment selection dialog... 55/3555/1
2019-11-18 Marko LuukkainenCreating equipment with predefined nozzles. 53/3553/1
2019-11-15 Marko LuukkainenPrevious change caused ClassCastExceptions. 41/3541/1
2019-11-15 Marko LuukkainenAdjust turn component radius with combo box (instead... 32/3532/1
2019-11-15 Marko LuukkainenTag user modifiable length 28/3528/1
2019-11-12 Marko LuukkainenEditor internal toolbar for Plant3D editor 10/3510/2
2019-11-12 Marko LuukkainenMerge "Removing components left orphan piperuns in...
2019-11-12 Marko LuukkainenRemoving components left orphan piperuns in the plant 06/3506/1
2019-11-12 Tuukka LehtonenDisable outline page DEBUG option from product builds 03/3503/1
2019-11-12 Marko LuukkainenAllow PipeRun merges when diameters are the same 00/3500/1
next