]> gerrit.simantics Code Review - simantics/3d.git/shortlog
simantics/3d.git
2020-04-28 Reino RuusuFix enabled state of wall thickness 96/4196/1
2020-04-21 Reino RuusuAvoid extra write transactions when opening Plant3D... 27/4127/1
2020-04-20 Reino RuusuTake values from pipe run as defaults for reducers 26/4126/1
2020-04-20 Reino RuusuOnly show elbows and ends when adding to an open pipe... 25/4125/1
2020-04-15 Reino RuusuReplace "turn" with "elbow" in component creation UI 21/4121/1
2020-04-08 Tuukka LehtonenAdded vtkCameraAndSelectorAction.setViewDir(Vector3d) 19/4119/1
2020-04-08 Tuukka LehtonenMinor improvement for Plant3DEditor extensibility 18/4118/1
2020-04-07 Reino RuusuHide insertion position controls when adding to a conne... 17/4117/1
2020-04-07 Reino RuusuFix division by zero in ComponentUtls.addComponent() 16/4116/1
2020-04-07 Reino RuusuFix getControlPointEnds() for end components 13/4113/1
2020-04-06 Reino RuusuFix error in inserting dual inline components 70/4070/1
2020-04-06 Reino RuusuAdd check for presence of pipe runs when updating offset 97/4097/1
2020-04-01 Reino RuusuUpdate offset values to reflect changes in pipe run... 85/4085/1
2020-04-01 Reino RuusuDisable insertion position buttons when inserting to... 84/4084/1
2020-03-13 Reino RuusuFix issues in offset calculations in directed path... 94/3994/1
2020-03-13 Reino RuusuFix direction calculations in addComponent() 93/3993/1
2020-03-12 Reino RuusuFix interpretation of turn angle in InsertInstruction 92/3992/1
2020-03-12 Reino RuusuFix error in assigment of component name for new components 91/3991/1
2020-03-12 Reino RuusuFix bug in adding a component before a nozzle 90/3990/1
2020-03-12 Reino RuusuIntroduce orientToDirection() method to pipe control... 89/3989/1
2020-03-12 Reino RuusuRefactoring of PipeControlPoint.getPathLegDirection() 88/3988/1
2020-03-12 Reino RuusuFix error in checking of changes in rotation angle 87/3987/1
2020-03-12 Reino RuusuFix validation message for turn angle values in compone... 86/3986/1
2020-03-10 Reino RuusuAllow insertion of components at the ends of straight... 84/3984/1
2020-03-10 Reino RuusuFix regression in synchronization of updates 83/3983/1
2020-03-09 Reino RuusuAdd checks for invalid numerical values in ComponentSel... 78/3978/1
2020-03-09 Reino RuusuUse inside diameter for eccentric reducer offset calcul... 77/3977/1
2020-03-09 Reino RuusuAdd a wall thickness property to pipe runs. 76/3976/1
2020-03-06 Reino RuusuEat all keyboard events by default in vtkSwtAction 74/3974/1
2020-03-06 Tuukka LehtonenMerge "Move global UI bindings to the product plugin"
2020-03-06 Reino RuusuMove global UI bindings to the product plugin 73/3973/2
2020-03-05 Tuukka LehtonenClose Plant3DEditor automatically when its input disapp... 71/3971/1
2020-03-05 Reino RuusuTools for fitting contents to view in Plant3D editor 69/3969/1
2020-03-05 Reino RuusuFix camera focus method to handle special case of verti... 67/3967/1
2020-03-05 Reino RuusuButton for default viewing direction 66/3966/1
2020-03-02 Reino RuusuShow an error dialog when attempting to insert a too... 60/3960/1
2020-03-02 Reino RuusuUpdates elbows when turn radius is changed in pipe run 59/3959/1
2020-03-02 Reino RuusuCamera rotation with stable rotation speed 54/3954/1
2020-03-02 Reino RuusuPerform node map updates in a procedure instead of... 50/3950/1
2020-02-28 Reino RuusuFix list indexing error in updateFixedLengths. 41/3941/1
2020-02-26 Reino RuusuRemove edge visualization from solid objects when not... 35/3935/1
2020-02-26 Reino RuusuRestore SCL-compatible API to P3DUtil 34/3934/2
2020-02-26 Reino RuusuBlock parallel execution of position updates and valida... 10/3910/2
2020-02-26 Reino RuusuFix issue with multiple degenerate legs in front of... 09/3909/2
2020-02-26 Reino RuusuRemove listener calls when property values not updated. 08/3908/2
2020-02-25 Reino RuusuShow busy cursor and block UI input while committing... 07/3907/1
2020-02-24 Reino RuusuEnable model loading using an existing transaction. 03/3903/1
2020-02-23 Tuukka LehtonenProper description for plant3d.modeling feature 00/3900/1
2020-02-23 Tuukka LehtonenDisabled includePackedArtifacts to prevent pack200...
2020-02-23 Tuukka LehtonenStop using pack200 because it has been deprecated and...
2020-02-20 Reino RuusuRotation angle fully in context of the path leg delta 95/3895/1
2020-02-20 Reino RuusuFix cause of endless loop in overlap resolution 94/3894/1
2020-02-20 Reino RuusuFix error in PipingRules.updateFixedLengths 93/3893/1
2020-02-20 Reino RuusuPerform view direction switching via vtkCameraAndSelect... 92/3892/1
2020-02-20 Reino RuusuLet root node determine up direction for rotation angle... 91/3891/1
2020-02-20 Reino RuusuFix interpretation of rotation angle to path leg end... 89/3889/1
2020-02-19 Reino RuusuAllow selection of vertical direction in Plant3DEditor 83/3883/1
2020-02-18 Tuukka LehtonenUse maven jarsigner to sign the produced P2 repository...
2020-02-14 Reino RuusuAllow unsplitting removal of reducers by joining pipe... 72/3872/1
2020-02-14 Reino RuusuFix update of inline components with offsets 71/3871/1
2020-02-14 Reino RuusuFix handling of offsets in directed path leg updates 70/3870/1
2020-02-13 Reino RuusuFix handling offset in dual directed path leg updates 68/3868/1
2020-02-12 Reino RuusuAdded a length scaling factor for adding components 67/3867/1
2020-02-11 Reino RuusuFix orientation of new straight components in insertStr... 62/3862/1
2020-02-11 Reino RuusuFix synchronization of PipingRules.currentUpdates. 60/3860/1
2020-02-07 Reino RuusuRename Vector3d.length to vectorLength 58/3858/1
2020-02-06 Tuukka LehtonenMake component addition dialog resizable and remember... 54/3854/2
2020-02-06 Tuukka LehtonenMerge "Allow user to specify component name in Componen...
2020-02-06 Reino RuusuAllow user to specify component name in ComponentSelect... 55/3855/1
2020-02-06 Tuukka LehtonenFixed loading order problem that caused parameters... 53/3853/1
2020-01-29 Reino RuusuAdded labels to piping component types 19/3819/1
2020-01-14 Tuukka LehtonenAdded bundle metadata 85/3785/1 release/1.42.0
2019-12-12 Reino RuusuFix getRealPosition() for control points 09/3709/1
2019-12-10 Reino RuusuFix createRotation() and avoid unnecessary trigonometri... 95/3695/1
2019-12-10 Reino RuusuExpose offset calculation as API in PipingRules. 94/3694/1
2019-12-10 Reino RuusuFix issue in directed path updates with offsets 93/3693/3
2019-12-10 Reino RuusuGet inline component direction irrespectively of connec... 92/3692/2
2019-12-10 Reino RuusuAllow insertion of reducers in the middle of pipe runs 91/3691/1
2019-12-05 Reino RuusuEliminate rounding errors in property tabs. 88/3688/2
2019-12-05 Marko LuukkainenForce zero offset for concentric reducers 87/3687/1
2019-12-05 Marko LuukkainenMerge "Allow property editing with just a single mouse... release/1.41.0
2019-12-05 Marko LuukkainenMerge "Fix issue with cell editor type mismatch and...
2019-12-05 Marko LuukkainenMerge "Refuse attempts to set turn radius index to...
2019-12-05 Marko LuukkainenFix directed path leg update failing to update inline... 80/3680/1
2019-12-05 Reino RuusuAllow property editing with just a single mouse click 78/3678/1
2019-12-05 Reino RuusuFix issue with cell editor type mismatch and disable... 77/3677/1
2019-12-05 Reino RuusuRefuse attempts to set turn radius index to a negative... 76/3676/1
2019-12-05 Marko LuukkainenMerge "Fix removed nodes leaving visible graphical...
2019-12-05 Marko LuukkainenFix removed nodes leaving visible graphical elements. 75/3675/1
2019-12-05 Marko LuukkainenYesterdays change introduced infinite loop for directed... 74/3674/1
2019-12-04 Marko LuukkainenDirected path leg update handled offset wrong way. 70/3670/1
2019-12-04 Marko LuukkainenPrevent elbows overlapping nozzles 67/3667/1
2019-12-03 Marko LuukkainenFix path leg updates when reducer is the first or the... 65/3665/1
2019-12-03 Marko LuukkainenDisable DB level undo, when model modifying actions... 63/3663/1
2019-12-03 Marko LuukkainenRevised update logic for inline components 61/3661/1
2019-12-02 Marko LuukkainenShowing error messages when components overlap each... 59/3659/1
2019-11-29 Marko LuukkainenConverting variable angle turn turn to fixed angle... 48/3648/1
2019-11-29 Marko LuukkainenProcessing DB changes could leave control points unsync... 46/3646/1
2019-11-29 Marko LuukkainenHandle PipeRun removals with detaching Components. 44/3644/1
2019-11-28 Marko LuukkainenRemove/Split could go over PipeRun boundary and break... 40/3640/1
next