--- /dev/null
+<?xml version="1.0"?>\r
+<!DOCTYPE fontconfig SYSTEM "fonts.dtd">\r
+<!-- /etc/fonts/fonts.conf file to configure system font access -->\r
+<fontconfig>\r
+\r
+<!--\r
+ DO NOT EDIT THIS FILE.\r
+ IT WILL BE REPLACED WHEN FONTCONFIG IS UPDATED.\r
+ LOCAL CHANGES BELONG IN 'local.conf'.\r
+\r
+ The intent of this standard configuration file is to be adequate for\r
+ most environments. If you have a reasonably normal environment and\r
+ have found problems with this configuration, they are probably\r
+ things that others will also want fixed. Please submit any\r
+ problems to the fontconfig bugzilla system located at fontconfig.org\r
+\r
+ Note that the normal 'make install' procedure for fontconfig is to\r
+ replace any existing fonts.conf file with the new version. Place\r
+ any local customizations in local.conf which this file references.\r
+\r
+ Keith Packard\r
+-->\r
+\r
+\r
+<!-- Font directory list -->\r
+\r
+ <dir>#FONTDIR#</dir>\r
+ <dir>~/.fonts</dir>\r
+\r
+<!-- Font cache directory list-->\r
+\r
+ <cachedir>c:/windows</cachedir> \r
+ <cachedir>~/.fontconfig</cachedir>\r
+\r
+\r
+<!--\r
+ Accept deprecated 'mono' alias, replacing it with 'monospace'\r
+-->\r
+ <match target="pattern">\r
+ <test qual="any" name="family">\r
+ <string>mono</string>\r
+ </test>\r
+ <edit name="family" mode="assign">\r
+ <string>monospace</string>\r
+ </edit>\r
+ </match>\r
+\r
+\r
+\r
+\r
+<!--\r
+ Accept alternate 'sans serif' spelling, replacing it with 'sans-serif'\r
+-->\r
+ <match target="pattern">\r
+ <test qual="any" name="family">\r
+ <string>sans serif</string>\r
+ </test>\r
+ <edit name="family" mode="assign">\r
+ <string>sans-serif</string>\r
+ </edit>\r
+ </match>\r
+\r
+\r
+<!--\r
+ Accept deprecated 'sans' alias, replacing it with 'sans-serif'\r
+-->\r
+ <match target="pattern">\r
+ <test qual="any" name="family">\r
+ <string>sans</string>\r
+ </test>\r
+ <edit name="family" mode="assign">\r
+ <string>sans-serif</string>\r
+ </edit>\r
+ </match>\r
+<!--\r
+ Load local system customization file\r
+-->\r
+ <include ignore_missing="yes">conf.d</include>\r
+\r
+ <config>\r
+<!--\r
+ These are the default Unicode chars that are expected to be blank\r
+ in fonts. All other blank chars are assumed to be broken and\r
+ won't appear in the resulting charsets\r
+ -->\r
+ <blank>\r
+ <int>0x0020</int> <!-- SPACE -->\r
+ <int>0x00A0</int> <!-- NO-BREAK SPACE -->\r
+ <int>0x00AD</int> <!-- SOFT HYPHEN -->\r
+ <int>0x034F</int> <!-- COMBINING GRAPHEME JOINER -->\r
+ <int>0x0600</int> <!-- ARABIC NUMBER SIGN -->\r
+ <int>0x0601</int> <!-- ARABIC SIGN SANAH -->\r
+ <int>0x0602</int> <!-- ARABIC FOOTNOTE MARKER -->\r
+ <int>0x0603</int> <!-- ARABIC SIGN SAFHA -->\r
+ <int>0x06DD</int> <!-- ARABIC END OF AYAH -->\r
+ <int>0x070F</int> <!-- SYRIAC ABBREVIATION MARK -->\r
+ <int>0x115F</int> <!-- HANGUL CHOSEONG FILLER -->\r
+ <int>0x1160</int> <!-- HANGUL JUNGSEONG FILLER -->\r
+ <int>0x1680</int> <!-- OGHAM SPACE MARK -->\r
+ <int>0x17B4</int> <!-- KHMER VOWEL INHERENT AQ -->\r
+ <int>0x17B5</int> <!-- KHMER VOWEL INHERENT AA -->\r
+ <int>0x180E</int> <!-- MONGOLIAN VOWEL SEPARATOR -->\r
+ <int>0x2000</int> <!-- EN QUAD -->\r
+ <int>0x2001</int> <!-- EM QUAD -->\r
+ <int>0x2002</int> <!-- EN SPACE -->\r
+ <int>0x2003</int> <!-- EM SPACE -->\r
+ <int>0x2004</int> <!-- THREE-PER-EM SPACE -->\r
+ <int>0x2005</int> <!-- FOUR-PER-EM SPACE -->\r
+ <int>0x2006</int> <!-- SIX-PER-EM SPACE -->\r
+ <int>0x2007</int> <!-- FIGURE SPACE -->\r
+ <int>0x2008</int> <!-- PUNCTUATION SPACE -->\r
+ <int>0x2009</int> <!-- THIN SPACE -->\r
+ <int>0x200A</int> <!-- HAIR SPACE -->\r
+ <int>0x200B</int> <!-- ZERO WIDTH SPACE -->\r
+ <int>0x200C</int> <!-- ZERO WIDTH NON-JOINER -->\r
+ <int>0x200D</int> <!-- ZERO WIDTH JOINER -->\r
+ <int>0x200E</int> <!-- LEFT-TO-RIGHT MARK -->\r
+ <int>0x200F</int> <!-- RIGHT-TO-LEFT MARK -->\r
+ <int>0x2028</int> <!-- LINE SEPARATOR -->\r
+ <int>0x2029</int> <!-- PARAGRAPH SEPARATOR -->\r
+ <int>0x202A</int> <!-- LEFT-TO-RIGHT EMBEDDING -->\r
+ <int>0x202B</int> <!-- RIGHT-TO-LEFT EMBEDDING -->\r
+ <int>0x202C</int> <!-- POP DIRECTIONAL FORMATTING -->\r
+ <int>0x202D</int> <!-- LEFT-TO-RIGHT OVERRIDE -->\r
+ <int>0x202E</int> <!-- RIGHT-TO-LEFT OVERRIDE -->\r
+ <int>0x202F</int> <!-- NARROW NO-BREAK SPACE -->\r
+ <int>0x205F</int> <!-- MEDIUM MATHEMATICAL SPACE -->\r
+ <int>0x2060</int> <!-- WORD JOINER -->\r
+ <int>0x2061</int> <!-- FUNCTION APPLICATION -->\r
+ <int>0x2062</int> <!-- INVISIBLE TIMES -->\r
+ <int>0x2063</int> <!-- INVISIBLE SEPARATOR -->\r
+ <int>0x206A</int> <!-- INHIBIT SYMMETRIC SWAPPING -->\r
+ <int>0x206B</int> <!-- ACTIVATE SYMMETRIC SWAPPING -->\r
+ <int>0x206C</int> <!-- INHIBIT ARABIC FORM SHAPING -->\r
+ <int>0x206D</int> <!-- ACTIVATE ARABIC FORM SHAPING -->\r
+ <int>0x206E</int> <!-- NATIONAL DIGIT SHAPES -->\r
+ <int>0x206F</int> <!-- NOMINAL DIGIT SHAPES -->\r
+ <int>0x3000</int> <!-- IDEOGRAPHIC SPACE -->\r
+ <int>0x3164</int> <!-- HANGUL FILLER -->\r
+ <int>0xFEFF</int> <!-- ZERO WIDTH NO-BREAK SPACE -->\r
+ <int>0xFFA0</int> <!-- HALFWIDTH HANGUL FILLER -->\r
+ <int>0xFFF9</int> <!-- INTERLINEAR ANNOTATION ANCHOR -->\r
+ <int>0xFFFA</int> <!-- INTERLINEAR ANNOTATION SEPARATOR -->\r
+ <int>0xFFFB</int> <!-- INTERLINEAR ANNOTATION TERMINATOR -->\r
+ </blank>\r
+<!--\r
+ Rescan configuration every 30 seconds when FcFontSetList is called\r
+ -->\r
+ <rescan>\r
+ <int>30</int>\r
+ </rescan>\r
+ </config>\r
+\r
+</fontconfig>\r